The EU stipulates that all mechanical and safety components that fall within the scope of the Machinery Directive must be properly assessed for compliance with the EU market. The Machinery Directive has been revised three times so far and the new Machinery Directive 2006/42/EC was published in 2009. Began on December 29, replacing the original Machinery Directive 98/37/EC. The new directive contains some new requirements and changes. Due to the inability of China's machinery export enterprises to adapt and follow up in a timely manner, many products cannot enter the EU market and cause a lot of losses. It has to be said that this is a very serious situation for China's machinery enterprises. The test. The main products involved in the new Machinery Directive include: agricultural machinery (such as tractors), food machinery (such as mixers), hand-held machinery (such as hand-held grinders), electric tools (such as scrapers), machine tools, lifts, etc. Compared with the directives, new directives have seen some new requirements and significant changes in the scope of application, the boundaries of other directives, market surveillance, safety components, basic health and safety requirements, and conformity assessment procedures. The National Institute for Certification, Accreditation, and Certification (CCAI) believes that the export of EU mechanical products from China is hindered for two reasons: First, many mechanical export companies (including testing organizations) do not really understand the EU's new directive on machinery. Second, many companies require intermediary agencies to conduct consultations and certifications, but these intermediary agencies do not really understand the requirements of the European Union themselves, and many CE-certified products are also hampered in the EU. Therefore, in order to reduce export obstacles and avoid trade risks, both machinery companies and related organizations should pay attention to the new directives and actively respond to them from the perspective of practical application and technology. Both companies and testing agencies should carefully interpret the new directives and analyze the new and old directives. The difference is that we must truly understand the internal requirements of the new directive; companies should review their own products in a timely manner, if necessary, to rectify products and technical documents to meet the requirements of the new directive.
With the rapid development of the electrical and electronics industry, the world has entered the 5G, the demand for communication base will be greatly increased. aluminum alloy die-casting products have light weight, good heat dissipation, and good mechanical properties, thus communication boxes, filters, panel, radiator and so on are made of aluminum alloy die casting. Xinyu mould is located in Beilun, called China's hometown of die casting. It has many years of experience in providing aluminum die casting dies for the electrical and electronics industry, we have been building a lot of dies for world famous electric and electronics giant, such as ZTE, Emerson and so on. We are looking forward to cooperating with you, competitive price, high quality, and less Leadtime are our promise to you.
The electric power industry covers the generation, transmission, distribution and sale of electric power to the general public and industry. The commercial distribution of electric power started in 1882 when electricity was produced for electric lighting. In the 1880s and 1890s, growing economic and safety concerns lead to the regulation of the industry. Once an expensive novelty limited to the most densely populated areas, reliable and economical electric power has become an essential aspect for normal operation of all elements of developed economies. The electronics industry, especially meaning consumer electronics, emerged in the 20th century and has now become a global industry worth billions of dollars. Contemporary society uses all manner of electronic devices built in automated or semi-automated factories operated by the industry. Products are assembled from integrated circuits, principally by photo lithography of printed circuit boards.Common parts manufactured are connectors, system components, cell systems, computer accessories, and these are made of Aluminium alloy, alloy steel, copper, brass, stainless steel, plastic, steel tubing and other materials.
Fig. Electrical component die
Xinyu Mould Capabilities
1.Year Of Establishment:2002
2.Location:2 (One Is Brand New)
3.Land Area:3600sqm
4.Emplyees:120
5. Equipment;CNC:18 (Makino, Toshiba, Liyang ), WEDM:10, EDM:9, Spotting Machine:2, CMM:2, Gun Drill Machine:2, Die Casting Machine:7, Others:50
1. Engineers In 2d&3d: 16
2. Engineers In Cnc Programming:6
3.File Format For 2d: Dwg&Dxf
4.File Format For 3d:Iges&Step
5.Software For 2d:CAD
6.Software For 3d:Simens NX & Pro-E
7.Software For Programming: Powermill
8.Software For Mould Flow: Magma
1.MES Process Control System
2.IATF 16949 Quality System
3.Well-Trained Operators
4.CMM Inspection
1. CAE Support Magma(Lid 18175001)
2.Rich Experience In Casting Dies For Auto Structual Parts,Powertrain;Oil Pan;Redirector; AC Compressor
3.Trial Run Machines Available In House From 160t To 1600t
4.Vaccum Venting System Application In Dies
5. Partial Squeeze Skill In Dies
6.High Precision Imported CNC(5 Axis)
7.Globalized Hr Concept
1.Max Die Size:2500*2500*1800
2.Max Die Tonnage:2500t
3.Biggest Die Casting Machine:1600t
4.Most Complex Die: 11slides
5.Yearly Capacity:350sets
1.Main Market:Na;Europe;Asia
2.Main Field: Auto;Telecommunication;
Lighting;General Machinery;Power Tool
Furniture
3.Partner Offering After Sales Service:
Available In India&Us,Europe
4.Business Involved:
Aluminum Die Casting Dies
Aluminum Die Casting Components
1. Fob Ningbo/Shanghai
2.Payment Term:Tt
3.For Dies:50% Down Payment 50% Prior To Delivery
4. For Castings: 10% Down Payment
The Rest Within 30days After b/l Date
5.Leadtime For Quotation:2days
6.Feedback For Customers' Query:24hours
Electrical and Electronics Die Electrical and Electronics Die, Aluminum Electrical and Electronics Die,Die for Electrical and Electronics Magnets,Electrical and Electronics Progressive Dies Ningbo Beilun XinYu Mould Manufacturing Co.Ltd. , http://www.xinyudiecasting.com
China Industrial Network News has increased the number of products exported by Chinese companies to the European Union. China has replaced the United States as the EU’s largest trading partner since 2006. However, in recent years, the EU has stepped up supervision of China’s export products for various reasons. , Embodied in the new EU Machinery Directive implemented at the end of last year.
Xinyu Mould At Glance
Xinyu Mould Technical Profile
Xinyu Mould Process Control
Xinyu Mould Advantages
Xinyu Mould Die Capacity
Xinyu Mould Marketing
Xinyu Mould Commercial Terms&Conditions