Model NO.: High Quality Cold Rolled Hot Rolled Metal Coil Cut
Thickness Range: 0.1-4mm
Raw Material: Cr Steel, Al, PPGI, Hr, Silicon Steel
Cutting Length Precision: Plus Minus 0.3-0.5
Package: Naked Package and Fixed in The Container
Trademark: Wuxi Longar
Transport Package: Naked Package and Fixed in The Container
Specification: Steel Coil Cut To Length Line Suppliers
Origin: Wuxi
Product Feature
High Quality Cold Rolled Hot Rolled Metal Coil Cutting Length Line

Main Techical Parameters
High Quality Cold Rolled Hot Rolled Metal Coil Cutting Length Line

Machine Layout
High Quality Cold Rolled Hot Rolled Metal Coil Cutting Length Line

Coil Car&V Plate -- Decoiler -- Press&Guider -- Hydraulic Shovel -- Pinch&Leveler -- Loop -- Side Guider -- Servo Cut Length -- Shear -- Working Table -- X Lifter -- Stacker -- Product Car
About Our Company

WUXI LONGAR MACHINERY MANUFACTORY Co., Ltd is a professional manufacturer and exporter for all kinds of Slitting lines and Cut to Length lines.In the past more than 15 years We have established and keep good business relationship with global customers on basic mutual benefits, contributing to our great business records and reputation.Our products are exported to American& European &South American& Africa &Asian market etc…
The thickness for Slitting line is 0.2-16mm, width range from 200-3000mm, with speed up to 180m/min.

The thickness for Cut to Length line is 0.09-28mm, width range from 200-3000mm, with speed up to 80m/min.

We have achieved CE certificate and SGS certificate .
Our goal is to supply highly quality personalized products by on time delivery with all around service at reasonable cost.Working to extend our presence internationally, we are looking forward to cooperating with your company for mutual benefit.
Contact Jean Sun for inquiry
High Quality Cold Rolled Hot Rolled Metal Coil Cutting Length Line

Wuxi Longar Machinery Manufactory Co.,Ltd

Wuxi Bono International Co.,Ltd

Factory:No.19 Jingxin Road, Xibei Industry Zone, Wuxi, Jiangsu, China

Office:No.1005, 39#, Liandong U Builing, Beitang District, Wuxi, Jiangsu, China

Http://www.Wxlongar.Com

Http://www.Wxbono.Com

Tel:+86 510 82698581

Fax:+86 510 82610322

Mobile:+86 15298417602

Water Diversion Tank

Working principle: Before using the vacuum diversion tank, fill the vacuum tank with water. When the water in the tank is sucked out by the pump, a negative pressure (vacuum) is generated in the tank. Due to the effect of atmospheric pressure, the water in the tank enters the vacuum tank through the suction pipe, and then flows out through the vacuum tank outlet. The pump can continuously supply water.
The installation should pay attention to the following aspects:
1. The entire water suction system must be tightly sealed.
Reduce the resistance of the suction pipe as much as possible. The diameter of the suction pipe should not be smaller than the inlet diameter of the pump, making its flow rate about 1.0m/s.
2. Minimize the suction height and ensure that the pump is filled with water to minimize the height of the water inlet.
3. The water storage tank should be installed away from the water source to reduce the length of the suction pipe.
4. The water tank has a large volume and a small volume, which cannot be smaller than the design volume to ensure its water absorption capacity.

Stainless Steel Vacuum Water Diversion Tank, Vertical Vacuum Water Diversion Tank, Vacuum Water Diversion Tank,Sodium Sulfate Water Diversion Tank

Yangzhou Tongyang Chemical Equipment Co., Ltd. , https://www.tongyangchemic.com