At present, the tin- mineral mines produced by various countries' tin- smelting plants are smelted by using tin alloys with higher grades in a matching manner. China has a large number of containing arsenic, antimony high refractory tin, so the late 1970s made many experimental studies. Sulfur vulcanization is very effective in enriching tin, so the process of combining metallurgy and metallurgy is adopted. In the beneficiation process, only a complex tin ore containing arsenic and antimony is produced to increase the recovery rate of tin, and then the complex tin ore is vulcanized in a fumigating furnace to obtain a complex tin soot. The handling of complex tin soot is still in the experimental stage and there are several different processes. One of the processes is shown in Figure 1. The chemical composition (%) of tin used in the test was: 4.96Sn, 4.33Pb, 3.15Sb, 1.77As, 0.025Ag, 0.011In, 0.019Cd, 0.30Cu, 5.99S, 0.30C, 28.95Fe, 0.88CaO, 20.44 SiO 2 , 3.05Al 2 O 3 , the product is sodium stannate. FIG smelting smoke tin complex 1 - melting alloy alkali - sodium flooding Alkali leaching solution purification and concentration of tin production process The second process is shown in Figure 2. The chemical composition (%) of the tin soot used in the test was: 21.26Sn, 17.92Pb, 9.73As, 12.56Sb, 5.03Zn, 0.041Ag, 0.047In, 0.19Cd, 3.79S, 2.63Fe, 0.29CaO, 3.28SiO 2 . The phase analysis is shown in the table below. The product is tin- lead alloy. Fig. 2 Process of reduction and roasting of high arsenic and antimony polymetallic tin soot (twice) arsenic removal-reduction smelting-electrolytic refining production of tin-lead alloy Phase analysis of high arsenic bismuth polymetallic tin soot /% tin lead arsenic antimony Zinc Phase content Phase content Phase content Phase content Phase content SnO SnO 2 Sn 5.7 87.9 6.2 PbSO 4 PbO PbS Insoluble slag 25.1 57.1 5.5 11.7 As 2 O 3 M3(AsO 4 ) 2 As As 2 S 3 32.3 57.5 1.9 8.3 Sb 2 O 3 Sb 2 S 3 M3(SbO 4 ) 2 21.6 4.3 74.1 ZnO ZnS Insoluble slag 6.2 84.8 0.9 The third process is shown in Figure 3. The chemical composition (%) of the sample was: 23.28Sn, 11.81Sb, 20.74Pb, 4.79Zn, 0.055Ag, 2.56S, 6.42As, 1.85Fe, 0.004Bi, 0.81CaO, 2.79SiO 2 , 2.79SiO 2 , 1.20Al 2 O 3 , 0.047In. This is a combination of wet and fire method. The chlorination reduction leaching method is used to completely separate arsenic at one time; and the associated elements such as bismuth, lead, zinc, silver and iron can be completely removed, and then enter the traditional Fire process. Fig. 3 Principle process of treatment of high arsenic and antimony polymetallic tin soot by CR (chlorination reduction leaching distillation)
Product Description:
Crushing Hammer,Excavator Crushing Hammer,Side Type Hydraulic Breaker,Breaker Machine Excavator,Hydraulic Hammer for Excavator CHANGZHOU LVSONG INTERNATIONAL TRADING CO.LTD , https://www.yhyuanhang.com
Our Product Use High performance hydraulic crushers concrete rock pulverizer for excavator,it is the perfect tool for crushed concrete.the product is suitable for the demolition of residential buildings and factory buildings, the demotion of reinforced concrete, and the recycling of waste steel bars.
A high performance cylinder reduces the time needed to open and close jaws,our products for the protection of hydraulic cylinder has a unique structure, to ensure that the comminutor can adapt to the harsh working environment.
The product can have a large opening, which is equipped with a cutting blade made of high-quality steel, which can cut the steel bar while crushing the concrete.
Each movable connection outlet of the product is designed with a lubricating grease injection port to ensure good lubrication at the movable connection of the product.
Features
1. The working efficiency is 3-5 times higher than the traditional hydraulic breaker;
2. Larger opening, larger bite force, smaller bite gap;
3. Adopt high strength, light and wear-resisting manganese plate, long working life;
4. Easy to disassemble and install, unique oil circuit design, fast cylinder speed;
5. Flexible and convenient operation, low noise and no vibration.
Our group company has its own five production lines, with a workshop area of about 90000 square meters, and has its own engineering machinery research and development team and professional production plants. The main products include construction machinery, construction engineering, structural components, aerial work platforms, elevated work platforms, adjustable work platforms, excavator Hydro Crusher hydraulic crushers, Hydraulic Crusher,hydraulic crushers, excavator manual quick connectors, excavator accessories hydraulic quick connectors, and other popular products.
