China 47Mm Friction Bolt,Split Set Bolt supplier & manufacturer, offer low price, high quality Mining Bolt,Split Set Rock Bolts, etc.
Split set bolt is also called "Split Set Stabilizer". It was successfully developed by American Professor Scott in the early 1970s. It was used as a patented product by Ingersoll Rand for mining support. In the early 1980s, the Beijing Institute of Well Construction conducted exploratory tests on slotted pipe anchors in the laboratory and achieved good results. Later, it was gradually promoted and applied in the coal system.
Split set bolt is a underground mining support product. It has simple installation process and convenient use. It has strong anchoring force and tensile strength in underground mining and shotcrete support. It has Large force, strong expansion force.
Split set bolt has good supporting effect. Bolt support conforms to modern rock mechanics and surrounding rock control theory in terms of support principles, and belongs to active support. After the bolt is installed, the stability of the surrounding rock can be mobilized and utilized, and the bearing capacity of the surrounding rock can be fully utilized, and controls the deformation of the surrounding rock of the roadway effectively.so split set bolt can protect the stability of the surrounding rock of the roadway and improve the maintenance of the roadway.
Split set bolt has simple installation and labor saving. It uses fewer supporting materials and lighter weight than other bolts. When tunneling, the transportation volume of supporting materials is reduced, and the labor intensity is greatly reduced, which is conducive to improving the efficiency of tunneling.
47Mm Friction Bolt,Rock Anchor Bolts,Rock Bolt Sizes,Friction Rock Stabilizer anto mining equipment co.,Ltd , https://www.antobolts.com
enamel wire stripping machine Introduction:
TF series wire stripper can be used for removing PVC/plastic/PE skin and pick up copper or aluminum cores inside the wire. It has high stripping efficiency and get high purity copper or aluminum. Normally there are several holes with different size which applicable for different diameter wires and cables, users can choose suitable model according size of raw material.
enamel wire stripping machine Factory Introduction:
As a professional metal recycling machines manufacturer, we have been working hard to provide advanced equipment and professional solutions for your metal recycling business. Always endeavored in developing advanced metal recycling technology, we can customize special solutions to help you recycle more efficiently and more cost effectively.
No matter you are engaged in processing copper cables, scrap radiator, scrap motor, aluminum cans, as well as other types of metal, you can find proper solutions here. We manufacture various types of copper cable granulator, wire stripping machine, radiator recycling machine, motor recycling machine, metal crusher and metal baler to meet different requirements for scrap metal recycling. Besides, plastic recycling machine is also in our business range.
enamel wire stripping machine Application:Â
It applies to various types of electric wires and cables, including copper wires, aluminum wires, steel wires, etc. Various rubber cables are easy to be stripped. Moreover, the cable stripper can strip single-core or twin-core flat wires at one time.
Main Parts:Â
Cable input: Scrap cables are put into the hole for peeling. There are different size of the holes, and customers could choose the applicable one according to cable diameter.Â
Peeled cable output: Cables after peeling get out of this plate: clean core and clean pvc cable skin.Â
Cutting blades: Cable skin is cut by blades and separated with inside core.
Gear: Gears help the roller with blades rotate to finish cable peeling.Â
Plug: We could put different standard plug according to customers' demand.Â
Wheel: There are wheels on the stripper.It is easy to move the machine freely.
enamel wire stripping machine Specifications:Â
 TF-3 Specifications:Â
Â
Model
Wire dia(mm)
Voltage(V)
Power(kw)
Dimensions(mm)
Weight(kg)
Capacity(kg/day)
TF-3
1-35
220/380
2.2
600*580*840
80
400-1000
enamel wire stripping machine Packing&Shipping:Â
Basically we pack the strippers with plastic bag or plastic film firstly, and then put them into ply wooden case with suitable size. Â
If you need whole container strippers, we will also pack them with wooden case firstly and put them into container then. Â 
enamel wire stripping machine Other ModelsÂ
 Customers could choose proper model according to raw material diameter.Â
And please contact with us for best advice!Â
Model
Wire dia(mm)
Voltage(V)
Power(kw)
Dimensions(mm)
Weight(kg)
Capacity(kg/day)
TF-1
1-25
220/380
1.5
550*510*840
60
100-300
TF-2
1-30
220/380
2.2
560*550*840
70
300-600
TF-4
1-42
220/380
2.2
700*610*840
110
600-1500
TF--5
1-55
220/380
2.2
700*610*840
110
600-1700
TF-6
2-90
220/380
3/4
800*580*1200
200
800-2000
Contact:Â
TinaÂ
Mobile:+8615981925357Â
enamel wire stripping machine Introduction:
TF series wire stripper can be used for removing PVC/plastic/PE skin and pick up copper or aluminum cores inside the wire. It has high stripping efficiency and get high purity copper or aluminum. Normally there are several holes with different size which applicable for different diameter wires and cables, users can choose suitable model according size of raw material.
enamel wire stripping machine Factory Introduction:
As a professional metal recycling machines manufacturer, we have been working hard to provide advanced equipment and professional solutions for your metal recycling business. Always endeavored in developing advanced metal recycling technology, we can customize special solutions to help you recycle more efficiently and more cost effectively.
No matter you are engaged in processing copper cables, scrap radiator, scrap motor, aluminum cans, as well as other types of metal, you can find proper solutions here. We manufacture various types of copper cable granulator, wire stripping machine, radiator recycling machine, motor recycling machine, metal crusher and metal baler to meet different requirements for scrap metal recycling. Besides, plastic recycling machine is also in our business range.
enamel wire stripping machine Application:Â
It applies to various types of electric wires and cables, including copper wires, aluminum wires, steel wires, etc. Various rubber cables are easy to be stripped. Moreover, the cable stripper can strip single-core or twin-core flat wires at one time.
Main Parts:Â
Cable input: Scrap cables are put into the hole for peeling. There are different size of the holes, and customers could choose the applicable one according to cable diameter.Â
Peeled cable output: Cables after peeling get out of this plate: clean core and clean pvc cable skin.Â
Cutting blades: Cable skin is cut by blades and separated with inside core.
Gear: Gears help the roller with blades rotate to finish cable peeling.Â
Plug: We could put different standard plug according to customers' demand.Â
Wheel: There are wheels on the stripper.It is easy to move the machine freely.
enamel wire stripping machine Specifications:Â
 TF-3 Specifications:Â
Â
Model
Wire dia(mm)
Voltage(V)
Power(kw)
Dimensions(mm)
Weight(kg)
Capacity(kg/day)
TF-3
1-35
220/380
2.2
600*580*840
80
400-1000
enamel wire stripping machine Packing&Shipping:Â
Basically we pack the strippers with plastic bag or plastic film firstly, and then put them into ply wooden case with suitable size. Â
If you need whole container strippers, we will also pack them with wooden case firstly and put them into container then. Â
enamel wire stripping machine Other ModelsÂ
 Customers could choose proper model according to raw material diameter.Â
And please contact with us for best advice!Â
Model
Wire dia(mm)
Voltage(V)
Power(kw)
Dimensions(mm)
Weight(kg)
Capacity(kg/day)
TF-1
1-25
220/380
1.5
550*510*840
60
100-300
TF-2
1-30
220/380
2.2
560*550*840
70
300-600
TF-4
1-42
220/380
2.2
700*610*840
110
600-1500
TF--5
1-55
220/380
2.2
700*610*840
110
600-1700
TF-6
2-90
220/380
3/4
800*580*1200
200
800-2000
Contact:Â
TinaÂ
Mobile:+8615981925357Â
Model NO.: TF-3
Function: Wire Peeling
Application: All Kinds Cables
Operating: Automatic
Processed Cable Diameter: 1-160mm
Voltage: Customized
Color: as Required
Trademark: TF
Transport Package: Ply Wooden Case
Specification: 600*580*840mm
Origin: China
HS Code: 8479
Model NO.: TF-3
Function: Wire Peeling
Application: All Kinds Cables
Operating: Automatic
Processed Cable Diameter: 1-160mm
Voltage: Customized
Color: as Required
Trademark: TF
Transport Package: Ply Wooden Case
Specification: 600*580*840mm
Origin: China
HS Code: 8479
electric wire stripping machine for sale
electric wire stripping machine for sale