Air To Air Waste Heat Recovery Equipment
No heat transfer medium
Air to Air Waste Heat Recovery Equipment Air To Air Waste Heat Recovery Equipment,Waste Heat Recovery Machine,High Efficiency Waste Heat Recovery Equipment,Waste Hot Air Recovery Machine Dalian Transen Technology Co.,Ltd. , http://www.transen-china.com
Main parameter
1.  Specification of rolling material: 1250×(0.4-0.8)×L,yield strength ≤250MPa
2.  Working speed: 3.0-4.0m/min (take 350mm pitch of waves as example)
3.  Roller steps: 16 steps
4.  Frame of machine: welded with 350H beam steel
5.  Thickness of wallboard: 16mm
6.  Roller material: adopts superior 45# forged steel,with hard chromium plated
7.  Shaft material: adopts superior 45# forged steel, quenching and tempering
8.  Main shaft diameter:¢70 mm
9.  Main motor power: 5.5KW
10. Hydraulic station power: 11KW
11. Hydraulic station pressure: 10 -12Mpa
12. Electric control system: adopts PLC (Panasonic)frequency control
13. Machine size: 7000x1700x1400(mm)
Profile
Â
Work flow                       Â
Â
Passively de-coiling Guiding & Feeding material Roll Forming Cutting-to-length Output panel
Structure features and compositions
1.Structure features
a. Simple and reasonable structure, beautiful appearance, .Our whole machine adopts profile steel structure and all processed after welding,so it can work stably and has high efficiency.
b. Our machine adopts full automatic accurate fixed length punching and cutting, ends of finished sheets are beautiful and neat, without deformation.
2.Equipment structure
BH-1000-820 Glazed tile roll forming machine is equipped with Feeding device (5 T capacity),transmission, main machine and roller, punching after roll forming, cutting device, hydraulic system, electric control system, run out table, etc.
Factory
Â
Main parameter
1.  Specification of rolling material: 1250×(0.4-0.8)×L,yield strength ≤250MPa
2.  Working speed: 3.0-4.0m/min (take 350mm pitch of waves as example)
3.  Roller steps: 16 steps
4.  Frame of machine: welded with 350H beam steel
5.  Thickness of wallboard: 16mm
6.  Roller material: adopts superior 45# forged steel,with hard chromium plated
7.  Shaft material: adopts superior 45# forged steel, quenching and tempering
8.  Main shaft diameter:¢70 mm
9.  Main motor power: 5.5KW
10. Hydraulic station power: 11KW
11. Hydraulic station pressure: 10 -12Mpa
12. Electric control system: adopts PLC (Panasonic)frequency control
13. Machine size: 7000x1700x1400(mm)
Profile
Â
Work flow                       Â
Â
Passively de-coiling Guiding & Feeding material Roll Forming Cutting-to-length Output panel
Structure features and compositions
1.Structure features
a. Simple and reasonable structure, beautiful appearance, .Our whole machine adopts profile steel structure and all processed after welding,so it can work stably and has high efficiency.
b. Our machine adopts full automatic accurate fixed length punching and cutting, ends of finished sheets are beautiful and neat, without deformation.
2.Equipment structure
BH-1000-820 Glazed tile roll forming machine is equipped with Feeding device (5 T capacity),transmission, main machine and roller, punching after roll forming, cutting device, hydraulic system, electric control system, run out table, etc.
Factory
Â
through and exchange energy(heat-recovering system and exhaust heat recovery system). It can separate fresh air and exhaust air completely, avoided
any solvent transmission. The two air cross and counter flow to the exchanger, then fresh
air and exhaust air exchange energy through the metal plate,
collisions between particles in the hot inner region transfer energy to particle
s in the cooler outer region and realize to recycle energy from exhaust air.
Specifications
Modular construction
Compact structure
Dust prevention
Model NO.: BH-GT
Origin: Liaoning Province of China
HS Code: 8455229090
Model NO.: BH-GT
Origin: Liaoning Province of China
HS Code: 8455229090
Configuratioin
Configuratioin