XX- line of portable
X-ray units is designed to the principle of low cost and high reliability,
which is characteristic in convenient to carry, easy to operate, and highly
automated. X-ray tube and HT coil are all produced by DNDT which guarantees
system consistency and keep this unit have a longer service life.
Weight is further
reduced with the using SF6 insulation and Forced cooling fan, prolongs X-ray tube
life, makes this unit suitable for construction site, field work and high above
the ground work..
Control unit is designed
with microprocessor control and frequency conversion technique. With functions
of fully automatic warm-up program, fault display, over voltage and mis-start
protection, the stability and service life are much improved
Portable X Ray Machine Portable X Ray Machine,XXGH Panoramic X Ray Machine,XXGHA Panoramic X Ray Machine,Mini Portable X Ray Machine Dandong Nondestructive Testing Equipment Co., Ltd. , http://www.ddchinaxray.com
We not only offer stand-alone but also offer full line solution,About the whole line,From Water Treatment system----- Bottle Blowing Machine-----Juice Processing System-----Filling System ----- Packaging System
1,RO Water Treatment Process
Source water tank -----> Source water pump-----> Quartz sand filter-----> Active Carbon filter----->PP sediment filter-----> RO main machine----->Pure water tank----->Filling System
RO Standard Features:
(1) PLC controller in-build, full-automatic working;
(2) High rejection thin film RO membranes;
(3) 304stainless Stainless steel machine frames;
(4) Durable &Â Efficient 304Stainless Steel Pressure source water Pump and Booster Pump &Â motors;
(5) Electronic control pan;
(6) Panel Mount Flow Meters  (product water & concentrate);
(7) Pressure regulator valves;
(8) Oil-filled pressure gauges for inlet and concentrate;
(9) 304stainless steel Heavy-duty pressure tubing and connector for the RO system.
2,Full Automatic Bottle Blowing Machine
Air Compressor-----> Air Storage----->Air Filter----->Air Dryer----->Air Filter----->Water Chiller----->Preform Feeder-----> Full automatic Blow Molding machine
Features:
(1) Stable performance with advanced PLC;
(2) Conveying preforms automatically with conveyor;
(3) Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater;
(4) High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus;
(5) High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure;
(6) Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine;
(7) Strong clamping force with high pressure and double crank links to lock the mold;
(8) Two ways of operating: automatic and manual;
(9) Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand;
(10) Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process;
(11) Contamination is avoided for the bottle body;
(12) Ideal effect of the chilling with the chilling system;
(13) Easy installation and starting;
(14) Low rejection rate: less than 0.2 percent.
3,Juice Processing System
This part is mainly for the deployment and sterilization of fruit juice according to customers' requirements.
Including Syrup Melting Tank,Beverage Pump,Beverage Blending Tank,Double Syrup Filter,Juice De-Oxygenation Machine,Juice Homogenizer and Plate Style UHT sterilizer  (PHE UHT sterilizer).
4,Filling System (Mainly machine is Tribloc Rinser Filler Capper)
This machine works harmoniously with air-conveyor belt, It holds the bottles by the neck, thus, reducing the possibility of bottles falling over during conveying process.
This machine is used to fill fruit juice into pet bottle and with screw caps capping function.
This machine integrated three function: 1. Rinse the empty pet bottle, 2. filling the rinsed bottles, 3. capping the filled bottles.
Model RFC-W series
16-12-6
18-18-6
24-24-8
32-32-8
40-40-10
50-50-12
60-60-15
Washing-Filling-Capping
16-12-6
18-18-6
24-24-8
32-32-8
40-40-10
50-50-12
60-60-15
Producing capacity
(500ml)2000-4000
(bph)5000-7000
(bph)8000-12000
(bph)12000-15000
(bph)16000-20000
(bph)20000-24000
(bph)25000-30000
(bph)
Applicable bottle (mm)
φ=50-108 H=170-340 330ml-2.25L
Pressure (kg/cm2)
2~3
Outside vacuum
pump power (kw)Main motor
1.5kwMain motor
2.2kwMain motor
3.0kwMain motor
4.0kwMain motor
7.5kwMain motor
9.5kwMain motor
12kw
Overall dimension (mm)
(LxWxH)2100x1400
x25002460x1720
x26503100x2100
x26503500x2500
x26504600x1800
x26505200x4500
x34006500x4500
x3400
Weight(kg)
2500
3500
4200
5500
6800
7600
9800
5,Packaging System
Including Ink Printer,Automatic Sleeve Labeling Machine&Shrinking Tunnel and Automatic Shrinking Film Wrapper
The Features Of Labeling Machine:
(1) PLC control, full-automatic working;
(2) Touch-screen control panel, easy operate;
(3) Full cover Main engine:Make the operator safety work;
(4) Adjustable blade base: Unique cut off, double blade for long using life;
(5) Single positioned adjustable central transmission post, more stable label transmission;
(6) Screw rod of separate bottle: stable transportation of bottles;
(7) Label brushing set: more accuracy of label-casing precision;
(8) Label control sensor shelf: original creation tail surface and sensor are combined to improve the precision of cutting the material;
(9) Sensor control, no bottle no label insert;
(10) 304 stainless steel machine frame.
Welcome to our factory to visit our machines,Please contact:
Miss AmyÂ
Phone number:+86 13773239782
Â
Website:www.blissum.com
Model NO.: the whole line
Delivery Time: 40days After Payment
Installation: Free
Material: Stainless Steel
Productivity: as Required
Shipping Term: by Sea or by Train
Warranty: 2 Years
Trademark: Blissum
Transport Package: Wooden Case
Specification: SUS304/SUS316
Origin: Zhangjiagang, Jiangsu, China
HS Code: 8422301090
Juice Filling Line: