Gate Valve , one of the most widely applied valves, is a valve that opens by lifting a gate/wedge out of the path of the fluid. The gate faces of gate valve could be a wedge shape or be parallel. Gate valves are not suitable for regulating flow, having been designed to be fully opened or closed. When fully open, the gate valve has no obstruction in the flow path, resulting in very high flow coefficient.
Gate valves have either a rising stem or a non-rising stem. Rising stem provide a visual indication of valve position. Non-rising stem is used where vertical space is limited or underground.
Kolink gate valves are supplied with three basic type of body-bonnet closures: bolted bonnet, welded bonnet and pressure seal bonnet. Bolted bonnet, the seal depends on the body-bonnet bolt preload to maintain sufficient compressive force, bolted bonnet is widely used for valves on various pressure ratings and sizes. Welded bonnet is mainly applied for small-size forged steel gate valves, suitable for applications requiring zero leakage on body-bonnet joint when carrying hazardous system fluids. Pressure seal bonnet is adopted for valves for high pressure service, typically in excess of 15 MPa (2250 psi). The body-bonnet joint seals improves as the internal pressure in the valve increases, compared to other constructions where the increase in internal pressure tends to create leaks in the body-bonnet joint.
Kolink gate valves are with flanged ends, butt weld ends, socket weld ends and screwed ends, and are constructed with various materials of cast carbon steel, stainless steel, alloy steels, and forged steels.
Various combinations of seating and stem materials are available to meet specific customer requirements.
The Cross-section of a Typical Cast Steel Gate Valve:
1) Austenitic ductile iron stem nut provides resistance to wear and heat.
4) Spacer rings and double packing sets available upon request.
8) Flexible wedge compensates for seat face distortion and body deformation due to pipe stress.
Gate Valve Cast Steel Gate Valve, Forged Steel Gate Valve, Slab Gate Valve, Wedge Gate Valve Supplier, Knife Gate Valve Wenzhou Kolink Valve Co., Ltd. , https://www.kolinkvalves.com
API Gate Valve
Pressure Seal Gate Valve
Forged Steel Gate Valve
2) Rising stem with precision trapezoidal threads for long-lasting service.
3) Two piece self-aligning Gland Bushing and Gland flange prevent stem damage.
5) Machined backseat designed to relieve back pressure on the stem packing when fully seated. Replacing stem packing under pressure is not recommended.
6) Renewable welded-in or screwed-in seats provide a bubble tight joint.
7) Wedge disc fully guided and precision fitted to ensure tight sealing performance.
Liangxiang emergency power car rental Liangxiang peripheral generator rental oil; 13522178869 Pei Pei not to blindly look at the price, and to ignore the performance, can not only value the performance at the price of the generator to buy it down, to be in the performance and Measure the price and then select the product to be purchased. We may wish to compare the above diesel and Cummins diesel generators. In terms of price, there is no doubt that Shangchai is indeed a lot cheaper than Cummins, but if you need a frequently used generator, then generator rental is recommended to buy Cummins diesel generators have a huge advantage in terms of performance configuration. In terms of use time and maintenance costs, the total cost of using generators will gradually approach or even exceed that of Cummins. The cost of the generator required, and in terms of safety and stability, Cummins still dominates. Second, according to the actual use of the situation to buy spare Langfang City generator rental. Because some factories or computer rooms have relatively high requirements for the continuous and stable operation of the power supply, therefore, in addition to the selection based on price and performance, attention should also be paid to the conditions for the production of generators, technologies, and after-sales services, etc., if the conditions permit. Please be sure to go to the factory for a field trip to confirm the strength and authenticity of Hengshui generator rental manufacturers so as to avoid unnecessary trouble. Third, new or used generators need to verify the query. After purchasing a diesel generator set, customers may sometimes be deceived by the appearance and ignore other important details. It is recommended that you call the free service hotline of the Langfang generator rental manufacturer to seek the help of a customer service to inquire or verify the power generation. The authenticity of the machine.