PVC Resin Junzheng Shenfeng Brand
Junzheng group is a leading enterprise in the chlor alkali
chemical industry in Inner Mongolia, with a production capacity of
800000 tons of PVC products, 550000 tons of caustic soda products and
300000 tons of ferrosilicon products.
PVC
(polyvinyl chloride polymer = PVC molecular structure) is a
thermoplastic resin polymerized by vinyl chloride under the action of
initiator. It is a homopolymer of vinyl chloride. Vinyl chloride homopolymer and vinyl chloride copolymer are collectively referred to as vinyl chloride resin. PVC is white powder with amorphous structure, and its branching degree is small. The natural color is yellowish translucent and glossy. The transparency is better than that of polyethylene and polypropylene,
and worse than that of polystyrene. Depending on the amount of
additives, it can be divided into soft and hard PVC. The soft products
are soft and tough, and feel sticky. The hardness of hard products is
higher than that of low-density polyethylene, but lower than that of
polypropylene. There will be whitening at the inflection point. Common products: plates, pipes, soles, toys, doors and windows, wire skins, stationery, packaging boxes, etc.
Pvc Resin Junzheng Shenfeng Brand,Juzheng Pvc Resin,Shenfeng Brand Pvc,Suspension Grade Polyvinyl Chloride Henan Chuange Industry CO.,LTD , https://www.chuangegroup.com
Features:
I-like tire sealer & inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.
Directions:
1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.
Â
Item No.:ID-309
Can Size:
65mm DÂ x 158mm H
Package:
450ml x 12pcs/ctn
Carton Size:
275x205x205 mm
20ft Container Loading
2500Â cartons
Â
Features:
I-like tire sealer & inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.
Directions:
1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.
Â
Item No.:ID-309
Can Size:
65mm DÂ x 158mm H
Package:
450ml x 12pcs/ctn
Carton Size:
275x205x205 mm
20ft Container Loading
2500Â cartons
Â
Model NO.: ID-501
Factory: Yes
OEM: Available
Use: for Emergency Use
Application: 1-6mm Holes
Trademark: i-Like, Captain
Transport Package: 12PCS/CTN, 2500ctns/ 20FCL
Specification: 450ml, 650ml
Origin: Guangdong, China
HS Code: 35069190
Model NO.: ID-501
Factory: Yes
OEM: Available
Use: for Emergency Use
Application: 1-6mm Holes
Trademark: i-Like, Captain
Transport Package: 12PCS/CTN, 2500ctns/ 20FCL
Specification: 450ml, 650ml
Origin: Guangdong, China
HS Code: 35069190
Captain tyre sealant tire repair foam