Ethylene Cracking Furnace Anchor Anchors are mostly used as fixtures for integral linings (castable, plastic and sprayable linings). Refractory brick linings also use anchors, but they are not used in many occasions. Metal anchors are usually used to support and fix thin or heat-insulating integral linings, such as chimney linings, wear-resistant linings of petrochemical catalytic cracking reactors (usually tortoise shell mesh anchors), integral jet metallurgy The lining of the spray gun, the overall lining of the immersion pipe of the DH and RH vacuum degassing devices, the lining of the rotary kiln discharge day, the feeding port, etc. Metal anchors are mostly used to fix linings with a long-term use temperature below 1200 °C, or short-term use temperature above 1200 °C that can be used intermittently. Ceramic anchors are usually used to fix thicker (greater than 200mm) integral linings and are characterized by: Ethylene Cracking Furnace Anchor,Corbel Anchor,601 Inconel Refractory Anchor,310 Stainless Steel Refractory Anchor Puyu kiln technology (jiangsu) CO.,LTD , https://www.anchorpy.com
The ultra-large 500? graphite tube heat exchanger has the characteristics of large heat transfer area, small resistance, fast heat transfer, temperature resistance, pressure resistance, corrosion resistance and the like. Its compressive strength is 60MPa, its thermal conductivity is 120kcal/m·h·°C, and its controllable temperature is -20°C~120°C during operation. It is suitable for cooling, condensation, heating and other process production processes. It is also applicable to Rising, falling film evaporation, can obtain high heat transfer efficiency. It is understood that the product's innovation is mainly reflected in three aspects: First, the use of advanced international thermal plastic, no cement joints and other production processes, equipment, structural strength is higher, the impact resistance is stronger; Second, the application of phenolic modification Resin impregnation new technology has greatly improved the service life of the equipment; Third, a large number of new technologies have been adopted, the production cost has been significantly reduced, and the price is only two-thirds that of similar imported equipment.
(1) It can withstand higher operating temperatures, and is generally used in the lining of kilns that are used for a long time above 1200 °C;
(2) It can withstand the erosion and corrosion of corrosive atmosphere;
(3) It can be extended to the working surface to reduce the peeling of the overall lining;
(4) Compared with metal anchors, the contact area with the refractory lining is large, so it has a greater supporting capacity;
(5) The thermal expansion coefficient is equivalent to that of the overall refractory material, which can eliminate the cracking or peeling of the lining due to thermal expansion mismatch
Shenzhen Chengzhou Tiancheng Graphite Products Co., Ltd. has successfully developed a 500-inch graphite tube heat exchanger and put it on the market. This product fills a gap in China's graphite industry, and has broad prospects for promotion.