The angle of the magnetic declination of the magnetic separator is too large or too small, and the small size affects the quality of the concentrate, so that the particles with smaller magnetic properties have the opportunity to be selected, but the grade of the tailings is lowered, which is good for the recovery rate; Too large is good for improving the quality of concentrates, because only the particles with large magnetic properties have the opportunity to be selected. If the magnetic properties are small, there is no chance to come up and enter the tailings, which will increase the tailings grade and reduce the recovery rate. Therefore, the size of the magnetic declination must be adjusted according to the operation requirements. Generally, the magnetic declination of the production site is adjusted to be around 15°-20°. Adjust the magnetic system yaw angle. If there are no changes in operating conditions and requirements during production, do not move easily. CZL-YB-××-L series Load Cell is spoke type structure, and is produced by alloy steel. Its bearing form is compression type. It Industrial Load Cells,Strain Gauge Load Cell,Low Height Analogue Load Cell,Spoke Load Cell SHANDONG JINZHONG SCIENCE & TECHNOLOGY GROUP COMPANY LIMITED , https://www.chinagoldbell.com
has various features such as low height, convenient installation and operation, strong anti-overload capacity and small power consumption, and has the capacity from 1t to 50t. It uses inside glue sealing, has excellent damp proof and anti-corrosion proof performances, and can be used in adverse environment. It is suitable for explosive danger fields, and has product explosion-proof label Exia â…¡ CT6Ga; ExiaD20T85. It can be used for producing electronic scales such as electronic Truck Scale and Hopper Scale.
The magnetic separator of the mineral processing equipment is equipped with a magnetic declination indicating device on the shaft head on the transmission side, and the adjustment angle of the magnetic system can be adjusted by moving the adjusting nut. Adjusting the magnetic declination of the magnetic separator can effectively control the magnetic separation effect of the magnetic separator.