Model NO.: 54N14
Origin: Jiangsu, China
HS Code: 85159000
54N14 TIG Ceramic Welding Nozzle compatible for TIG Welding torch 
Material ceramic
Type
54N14
Size 8 13mm  1/2 inches
  54N15 Size 7 11mm 7/16 inches
  54N15L size 7L 11mm 7/16 inches
  54N16 Size 6  10mm 3/8 inches
  54N16L Size 6L  10mm 3/8 inches
  54N17 Size 5  8mm   5/16 inches
  54N17L Size 5L 8mm   5/16 inches
  54N18 Size 4 6mm   1/4 inches
  54N19  Size 11 18mm  11/16 inches
Certification ISO9001, CCC, CE, ROHS, TUV
Note:All mentioned names, Trademarks and Part No.Are the property of their respective manufacturers, all consumables are manufactured and sold by L&H., reference to the original manufacturer is for convenience only.

Company introduction:
1,ChangZhou LongRen Mechanical & Electrical CO.,LTD is one of leading manufactory of MIG/TIG/Plasma welding torch and parts in China for more than 20 yeas.
2.The company also provides welding accessories, such as electrode holder, earth clamp, welding helmet, cable joint, ceramic backups, electrode rods, welding wire
3.Various products certified by CE and ISO9001:2000 quality management system.
4.99% products are exported to all over the world and gain high reputation from customers on the basis of best quality and Service.
54n14 Alumina Gas Lens Nozzle Suitable for TIG Welding Torch
54n14 Alumina Gas Lens Nozzle Suitable for TIG Welding Torch
54n14 Alumina Gas Lens Nozzle Suitable for TIG Welding Torch
54n14 Alumina Gas Lens Nozzle Suitable for TIG Welding Torch
 

Compact Feed Lines with compact design are preferred to be used in case of only small available space as well as in case of less delicate coil material with big material square. They normally are used at middle-sized feeding lengths and middle-sized number of press strokes per minute. 

By combination of straightener and roll feed into one part, so called feeder-straightener, which is positioned directly at the press, the needed space for a material loop of straightened material can be saved.

The feeder-straightener is supplied with material out of a very small loop of not straightened material below the Decoiler.

The decoiler is equipped with a variable speed drive as well as with a very sensitive loop control. By this way it is assured that there always will be enough material available for supply of the feeder-straightener.

In case that feeding lengths and stroke rates do require a bigger material stock within the material loop, the Compact Coil Feed line will be completed with a loop pit.

With our Coil Processing Systems you can process coil material width from 400mm to 1800mm, coil thickness from 0.6-6.0mm, coil weight up to 20000kgs.

Compact Feed Lines

Compact Feeder Line,Compact Coil Feeding Line,Compact Press Feed,Compact Press Feed Lines,3 IN 1 Press Feeding,Press Feedling Line,Complete Lines,Decoiler Straightener Feeder

Mayflay Machinery(huizhou) Co.,LTD , https://www.pressfeeders.com