Cut to length line ECL series ECL series cut to length line is composed of the followings:  Uncoiling Unit This uncoiling unit of our cut to length line allows several coil stocks to be pre-placed on the loading station. It is available with single head or double heads to suit different requirements. Leveler The leveler of our cut to length line may have various designs, from 2H, 4H or 6H. It can be flexibly controlled and can carry out good leveling of the plate materials. Its leveling roll is made of roll steel with a chrome-plated surface. It is of good abrasion resistance and long service life.  Feeder and Shear Our cut to length line employs a pair or two pairs of feed rolls, driven by an AC servo motor, to feed the strip to the set length precisely. They ensure fast positioning with little error. These feed rolls are compatible with a hydraulic shear or an air-clutch shear to carry out fast shearing and convenient clearance adjustment. It can be equipped with a roll type or a belt type conveyor. Stacking Unit Besides,there are also other types of ECL series cut to length lines,all the cut to length line are sa follows: Transaction procedure: Â
Glass Fiber Membrane
Glass fiber membranes adopt 100% borosilicate glass fiber, including two types, with binder shows chemical inertness and without binder. Add the adhesive is to enhance the mechanical strength of the glass fiber, mainly used for filtering coarse particles such as macromolecular substance and air dust. In order to avoid reacting chemically with the filtered medium, use the glass fiber without binder to filter organic substances and use the glass fiber with binder to filter inorganic substances. The depth membrane with fast speed, large load and retain particles is very small, can get the scope of the submicron particles, etc. The glass fiber membrane can stand 500 ℃ , can be used to analyze the burn proportion and high temperature gas filtration.
Glass fiber membrane has capillary fiber structure, can absorb more water than the equivalent of cellulose Filter Membrane, has the characteristics of the moisture absorption and biological inert, except hydrofluoric acid and high concentration of acid and alkali; The glass fiber membrane also has good chemical corrosion resistance for most of the solvents and reagents. It can be suitable for sample analysis and liquid flash count method. The glass fiber membrane also can be made completely transparent for subsequent microscopic examination.
Features and Benefits
1. Remain the fine particles, fast flow rate, and high load
2. Wet strength, higher load
3. The filtering speed is faster than general cellulose under the same condition of the particle retention. The membrane is thicker with strong load.
Application:
1. Applied for high efficiency filter, including waste water detection, Water Filtration, algae.bacteria cultivation and food analysis, protein filtration and weak determination of free beta launcher, recommended for weight determination of particulate matter in the air pollution monitoring, stack sampling and adsorption, etc.
2. Applied to keep tiny particles with fast flow rate. Especially suitable for the liquid clarification or the sample processing of fine particles in particle high quantitative suspension. Pre-filtration of the fine particulate matter, to make the LSC and protein binding.
3. Used in the standard filter paper to collect the suspended matter of drinking water, natural water and industrial waste water. Quickly and effectively to clarify aqueous solution containing small to medium small grain. Widely used for collecting liquid flash count and determined the combination with higher load.
4. Common membrane filtration materials, can be used with GF/PP to provide a very useful classification for the membrane.
5. Used for DNA binding, adsorption and purification of protein binding, the filter effect of filtering tiny protein precipitation is obvious, GF/F AND GF/D can be used as a pre-filter membrane to clarify the biochemical solution, fluid and nucleic acids.
6. Used in the automatic Air Filtration devices in roll membranes.
Technical parameter of the composite glass fiber filter paper
Membrane Filter Paper,Glass Fiber Filter Membrane,Glass Fiber Material,Filtration Of Hydraulic Oil Ji'an city Qing Feng Filter Equipment Material CO.,Ltd , https://www.qingfengfilter2.com
Â
A cut to length line is generally used for jobs like uncoiling, straightening, measuring, cross-cutting to length and stacking of various materials such as cold or hot rolling carbon steel, tinplate, stainless steel, and other kinds of metal with coated surfaces.
Features of Cut to Length Line:
1. Our cut to length line uses a roll feeding, AC servo drive.
2. It has a fully digital length control system that ensures fast positioning with little error.
3. It has a hard chrome plated surface and is durable and abrasion resistant.
4. It is used together with a hydraulic shear or an air-clutch shear to carry out fast shearing and convenient clearance adjustment.
5. Our cut to length line is suitable for hot rolling carbon steel, tinplate, stainless steel, and other kinds of metals with coated surfaces.
Advantage:
1. High degree of automation, easy & reliable operation
2. High length precision, high sheet flatness
3. Good order stacking
Â
1
Entry coil car
1 set
2
Uncoiler
1 set
3
Outboard supportÂ
1 set
4
Feeding table
1 set
5
Leveler
1 set
6
Loop table
1 set
7
Side guide
2 pairs
8
Servo feed roll
1 PC
9
ShearÂ
1 PC
10
Conveyor beltÂ
1 set
11
StackerÂ
1 set
12
BlowerÂ
1 set
13
Hydraulics
1 set
14
Electrics
1 set
Our cut to length line can be equipped with a pneumatic or electromagnetic stacking unit. It is equipped with a blower to protect the surface from scraping. Both longitudinal and transverse stacking are available.
Â
Model              Â
Coil thickness(mm)
Coil width(mm)
 cut tolerance(mm)
Line speed(max)(m/min)
Shear number(max)(spm)
Coil weight(ton)
ECL-2X1300
0.2-2
300-1300
±0.3
60
50
7/15
ECL-2X1600
0.2-2
400-1600
±0.3
 60
 50
 7/15
ECL-2X1850
0.2-2
900-1850
 ±0.3
 50
 40
 20
ECL-3X1600
0.5-3
400-1600
 ±0.3
 50
 40
 15
ECL-3X1850
0.5-3
900-1850
 ±0.3
 50
 40
 20
ECL-3X2000
0.5-3
900-2000
 ±0.3
 45
 40
 30
ECL-6X1600
1-6
600-1600
 ±1
 25
 20
 20
ECL-6X2000
1-6
900-2000
 ±1
 25
 20
 30
ECL-8X2000
2-8
900-2000
 ±1
 20
 20
 30
ECL-12X2000
3-12
900-2000
 ±1.5
 20
 10
 30
ECL-16X2000
4-16
900-2000
 ±2
 15
 8
 30
Inquiry - Project - Sign - Production - Inspection - Payment - Transportation - Installation& Commissioning - Guaranty
Jinan Eagle CNC Machine Co., Ltd (briefly JEM), located in Jinan city, Shandong Province, China, was founded in 2003. It is mainly engaged in developing and manufacturing of Cut to Length Line, Slitting Line, Rotary Shear, Slitting and Cut to Length Combined Line, Leveling Machine, Tension Leveler and so on. Our products are widely used in transfomer, motor, household appliance, automobiles, hardware, steel industries, etc. It can be used for processing cold and hot rolled steell, carbon steel, galvanized steel, silicon steel, tinplate, stainless steel, pre-painted steel, aluminium, copper and other metals.
Domestic customers include First Automotive Works (FAW), Second Automotive Works, Great Wall Automobile, Bao Steel, Anshan Steel, Handan Steel, Midea Group etc, and many of coil processing centers. Internationally, our products have also been installed in Europe, South America, Africa, Southeast Asia and so on.
Welcome you to our factory!
Model NO.: ECL Series
Uncoiling Weight: 7-35t
Certificate: CE, ISO9001
Guarantee Period: 12 Months
Trademark: Eagle
Specification: CE, ISO9001
Origin: Jinan, Shangdong
HS Code: 8462312000