Elbow in pipe system, elbow is the pipe that changes the direction of pipeline.
Use:A Pipe Fitting used in pipeline installation is used to connect two pipes with the same or different diameters to make the pipe turn at a certain angle and the nominal pressure is 1-1.6Mpa.
Application range: because of good comprehensive performance of the elbow, it is widely used in chemical, construction, water supply, drainage, oil, heavy industry, freezing, health, water heating, fire, electricity, space, shipbuilding and other basic projects.
Classification:
1, the material can be divided into cast iron, stainless steel, alloy steel, malleable iron, carbon steel, non-ferrous metals and plastics.
2, the production methods can be divided into push, press, forge, casting and so on.
3, according to its radius of curvature, it can be divided into long radius elbow and short radius elbow.
4, according to the pressure grade, there are about seventeen kinds, and the same as the American tube standards, such as Sch5s, Sch10s, Sch10, Sch20, Sch30, Sch40s, STD, Sch40, Sch60, Sch80s, XS; the most commonly used are the two kinds.
5, according to different shapes and uses can be divided into: groove elbow, card type elbow, double bearing elbow, flange elbow, different diameter elbow, bent head, bending head of internal and external teeth, stamping elbow, push bending head, socket elbow, butt elbow, inner wire elbow, etc.
Technical requirement:
It is required to control the radius of curvature. For example, if the radius is 1.5D, the radius of curvature must be within the required tolerance. Because most of these pipes are used for welding, in order to improve the welding quality, the end is all turned into a slope, a certain angle and a certain edge. This requirement is also strict, the edge is more thick, the angle is more and the deviation range is specified, and the geometric size is much more than the pipe. The surface quality and mechanical properties of elbow are basically the same as those of pipes. For welding convenience, the material of the steel connected to the pipe is the same.
Seamless Elbow,Pipe Elbow,Carbon Steel Elbow,Steel Pipe Elbow He Bei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.ghpipefittings.com
Advantages
1. High strength
2. Wear resistance and anti-aging
3. Good air tightness
4. Safety and reliability
5. High kneading&compressing resistance and damping capacity
Sale Floating Rubber Ship marine airbag
Type D=0.8m D=1.0m D=1.2m D=1.5m D=1.8m D=2.0m
3 layers 0.13MPA 0.10MPA 0.09MPA 0.07MPA 0.06MPA 0.05MPA
4 layers 0.17MPA 0.13MPA 0.11MPA 0.09MPA 0.08MPA 0.07MPA
5 layers 0.21MPA 0.17MPA 0.14MPA 0.11MPA 0.09MPA 0.08MPA
6 layers 0.25MPA 0.20MPA 0.17MPA 0.13MPA 0.11MPA 0.10MPA
7 layers 0.29MPA 0.23MPA 0.20MPA 0.15MPA 0.13MPA 0.12MPA
8 layers 0.33MPA 0.26MPA 0.23MPA 0.17MPA 0.15MPA 0.14MPA
The above specification only is our standard specification arrange. Other specification of ship launching airbags also available upon clients' request.
Since we own a professional technicians team, so the most advantage is that we can suggest you the most suitable quantity of airbags needed according to the actual condition of the ships and structures, which can avoid wasting the labor, cost and time. Our mission is provide world class goods to customer, so we guarantees high standards and performances of all products. Customer requirements are strictly followed during all production phases.
Model NO.: XC20140529005
Materials: Nature Rubber
Used: Ship Launching and Landing
Type: Sailing Yacht
Material: Nature Rubber
Trademark: XINCHENG
Specification: CCC CCS ISO9001: 2008
Origin: China(Mainland)
HS Code: 89670
Sale Floating Rubber Ship marine airbag is an extremely promising new technology. Our adopt natural rubber and advance winding process. Compared with traditional marine airbag, the advantages of airbag are: Flexibility, time -and -labor -saving, save equipment investment.