The sawdust mill is used to crush the raw materials with smaller diameters. The diameter of the corn stalks and branches is less than 50 mm. The fineness of the materials after crushing can reach 3-5 mm. If you want to crush the wood with a diameter over 50 mm, you can customize it more. Large sawdust machine. This article is collected by the sawdust mill
Double
stations Blister Sealing Machine
Double stations
blister sealing machine applications
The pulse fever comes from the heating element
of the mould/die, combines the plastic and the paper card perfectly. The heat
sealed products is not only with anti-moisture and anti-dust function but also
makes the products in a good-looking appearance.
Double
stations blister sealing machine Features
1. The machine
using four guide pins to guide the pressure plate, it is more flat, the
pressure is more stable, the paper card and blister adhesive perfectly.
Double stations blister sealing
machine Parameters
Item
Parameter
Model
HX-2030
Power supply
220v 50Hz
Power
3.5Kw
Size of the seal
500*700mm
Working station
2 working stations
Speed
10times/min
Machine size
1220*1440*1450mm
Weight
150kg
Double Stations Blister Sealing Machine Double Stations Blister Sealing Machine,Double Stations Plastic Blister Sealing Machine,Double Stations Plastic Sealing Machine,Double Stations Blister Pack Sealing Machine ShenZhen Hengxing Machinery Factory , http://www.szchxjx.com
Sawdust grinder (sawdust machine) maintenance and maintenance 1, do not arbitrarily increase the speed of the grinder. Generally allowed to differ from the rated speed by 8%-10%. When the crusher and the larger power machine work together, it should pay attention to control the flow and make the flow even, not negligence.
2, add grease. Commonly used is to install a cap type oil cup on the bearing. Under normal circumstances, as long as the oil cup lid rotation 1/4 every two hours, the cup of grease can be pressed into the bearing. In the case of closed bearings, grease can be filled once every 300 hours.
3. After the machine is started, do not open or inspect any part inside the machine. Various tools must not be randomly placed on the machine. When the abnormal sound is heard, it should be stopped immediately and the standby can be overhauled after stopping.
4, check and clean up in time. After the end of each day's work, the machine should be cleaned in a timely manner to check for looseness of the screws in each part and wear of the contused parts such as the claws and the sieve.
5. Carefully clean the raw materials to be crushed and it is forbidden to mix copper, iron, lead and other metal parts and other large debris into the sawdust crushing room.
Sawdust mill should pay attention to the following points in safety production:
1. Regularly carry out maintenance inspections on sawdust machine equipment; including checks on power supply, lubrication, wear, etc.;
2. During the operation of the sawdust machine, the staff should not be allowed to leave the work area to avoid accidents;
3, sawdust machine operators can not drink equipment to avoid unnecessary personnel injuries;
The above three points are not intended to prevent the emergency of the sawdust machine should not be dilemma, no one will lead to irreversible losses;
Applies to plastic blister(made by PVC, PET,
PETG etc) seal with paper card. It`s suitable for such as toys, stationery,
foods, commodity, cosmetics, hardware, medicine, etc. Like lipstick,
toothbrush, battery, surgical instruments, etc.
2. Unique pressure plate heating delay design allows the sealed products much
better and more attractive.
3. The round plate (square plate) can be rotated clockwise or anticlockwise
freely.
4. Fix with Φ80mm cylinder, can assure pressure, also assure stable sealing and
good looking.
5. Small size machine allows to put anywhere and easy to handle and convenient
to operate, also should improve the
work efficiency.