The start of the garbage truck is basically the same as that of a normal vehicle. I believe we are all familiar with it. We must insert the key, place it in a spiral, and light up on fire. Is this still necessary for people to teach? Need to know, according to this method in the long run, it will cause difficulties in the start of garbage. It takes a few fires to start. The correct ignition method for the garbage truck is: insert the key to rotate to ACC stop, wait for 2 to 3 seconds or so, make the main power relay contact firmly contact, let the first part needs to energize the device power; continue to turn the key to ON, and then Stop waiting for 6 to 10 seconds, let the oil pump relay pull, wait for each sensor to adjust the state, turn the key to START until the engine runs continuously and return to ON. However, for temporary or short-term parking, you can start quickly without stopping. According to the structure, it is mainly divided into four columns, single column (C type), horizontal, vertical frame, universal hydraulic press and so on. Powder Forming,Powder Forming Hydraulic Press Machine,C Frame Powder Forming,Hydraulic Press Machine 10 Ton CHENGDU ZHENGXI HYDRAULIC EQUIPMENT MANUFACTURING CO., LTD. , http://www.zxhydraulic.com
According to the application, it is mainly divided into metal forming, bending, stretching, punching, powder (metal, non-metal) molding, press fitting, extrusion and the like.
Hot Forging Hydraulic Press
The large forging hydraulic press is a forging device capable of performing various free forging processes and is one of the most widely used equipment in the forging industry. At present, there are 800T, 1600T, 2000T, 2500T, 3150T, 4000T, 5000T and other series of forging hydraulic presses.
Four-column hydraulic press
The hydraulic press is suitable for the pressing process of plastic materials. Such as powder product molding, plastic product molding, cold (hot) extrusion metal forming, sheet stretching and cross-pressure, bending, turning, correction and other processes.
The four-column hydraulic press can be divided into four-column two-beam hydraulic press, four-column three-beam hydraulic press, and four-column four-beam hydraulic press.
Single arm hydraulic press (single column hydraulic press)
Expandable working range, use three-sided space, lengthen hydraulic cylinder stroke (optional), maximum retractable 260mm-800mm, preset working pressure; hydraulic system heat sink.
Gantry hydraulic press
It can assemble, disassemble, straighten, calender, stretch, bend, punch and so on the machine parts, and truly realize the multi-purpose of one machine. The machine table can move up and down, the size expands the opening and closing height of the machine, and the use is more convenient.
Double column hydraulic press
This series of products are suitable for press fitting, bending and shaping, stamping and indentation, flanging, punching and shallow drawing of small parts; forming process of metal powder products. It adopts electric control, with jog and semi-automatic circulation, which can maintain pressure delay, and has good slider guiding, easy to operate, easy to maintain, economical and durable. According to the needs of users, it can add functions such as thermal instrument, ejection cylinder, stroke digital display and counting.