Brass 1/2" High Pressure Reducing Marine Water Pressure Reducing Valves

Nominal pressure: 1.6MPa

Working temperature: -20 to 150°C

Suitable medium: water

Thread: ISO07

Pressure testing: ISO5208

Component and material:

Body: brass

Spring: stainless steel

Spring: PVC

Seal gasket: PVC

Piston: PVC or brass

Bonnet: PVC

Filter: brass

Size: 1/2 to 4 inches

1. Nominal pressure:1.6MPa;
2. Working medium: hot & cold Water, Compressed Air, Oil, Non-Corrosive Fluid;
3. Working temperature: 0°C to 120 °C;

4. Adjustable range of pressure: when input pressure is 1.0MPa or above, the output pressure is 0.15MPa to 0.45MPa; when the input is less than 1Mpa, the output pressure reduce accordingly;

5. More options for customer, both Heavy model & Economic model available to satisfy diversified demand.

6. Thread standard: BSP or NPT can be optional.
Features
1. Material :316ss, titanium, other material as request
2. Working Pressure: up to 1000 psi
3.Working Temperature: --65''F to 850''F(--53°c to 455°c)
4.End Connection Type: metric and fractional tube fittings, NPT threads, ISO/BSP threads, weld ends
5. End Connection Size: 1/8 to 3/4 in., 3 to 12mm

Performance
1.compact design forspecial extreme working conditions
2.cold rolled threads of compact valve stem
3.non-rotary ball type lower stem and adjustable lower stem available
4. union-bonnet design prevents accidental valve disassembly
5.lubricated stem threads isolated from the process media
6. safety back seat seal in fully open position
7. panel mounting available
8.steady and durable fastening of the valve handle by double lock-pin

1. Product catalogue:

2.BCT Customer


 

3.Workshop and process

 

4.Inspection and test

 

 

 

Nominal pressure: 1.6MPa

Working temperature: -20 to 150°C

Suitable medium: water

Thread: ISO07

Pressure testing: ISO5208

Component and material:

Body: brass

Spring: stainless steel

Spring: PVC

Seal gasket: PVC

Piston: PVC or brass

Bonnet: PVC

Filter: brass

Size: 1/2 to 4 inches

1. Nominal pressure:1.6MPa;
2. Working medium: hot & cold Water, Compressed Air, Oil, Non-Corrosive Fluid;
3. Working temperature: 0°C to 120 °C;

4. Adjustable range of pressure: when input pressure is 1.0MPa or above, the output pressure is 0.15MPa to 0.45MPa; when the input is less than 1Mpa, the output pressure reduce accordingly;

5. More options for customer, both Heavy model & Economic model available to satisfy diversified demand.

6. Thread standard: BSP or NPT can be optional.
Features
1. Material :316ss, titanium, other material as request
2. Working Pressure: up to 1000 psi
3.Working Temperature: --65''F to 850''F(--53°c to 455°c)
4.End Connection Type: metric and fractional tube fittings, NPT threads, ISO/BSP threads, weld ends
5. End Connection Size: 1/8 to 3/4 in., 3 to 12mm

Performance
1.compact design forspecial extreme working conditions
2.cold rolled threads of compact valve stem
3.non-rotary ball type lower stem and adjustable lower stem available
4. union-bonnet design prevents accidental valve disassembly
5.lubricated stem threads isolated from the process media
6. safety back seat seal in fully open position
7. panel mounting available
8.steady and durable fastening of the valve handle by double lock-pin

1. Product catalogue:

2.BCT Customer


 

3.Workshop and process

 

4.Inspection and test

 

 

 

Cryogenic valves normally refer to valves with working temperature blow -110℃. It is widely used in LNG, LPG and other low temperature industry. Valves designed for cryogenic services, are specially prepared and designed to overcome these challenges. Appropriate component materials such as 304SS (CF8) and 316SS (CF8M) are normally used for body and trim, offering superior impact strength, and excellent corrosion resistance and heat loss properties. An extended bonnet and gas column design is also normally adopted to provide thermal insulation at the stem seal and stem packing area. At sufficient length, this design feature places the functionality of the stem seal in the vapor zone of the liquid media providing safe and continuous valve operation. A variety of body, trim, seat, and seal materials are available for use in cryogenic service. Customer specified options, such as body cavity vent hole, special extension lengths, and materials are also available upon request.

ZC Cryogenic Gate Valve service up to -196℃. Our in-house computer controlled test facility can certify valves up to 36".

Specifications

Cryogenic Gate Valve

Cryogenic Gate Valves, Cryogenic Water Gate Valve, Cryogenic Stainless Steel Gate Valves, Cryogenic High Pressure Gate Valve

Zhejiang Zhongcheng Valve Co.,Ltd. , http://www.apivalvestar.com