1. Electric control system: world-renowned controllers are applied. For example, servo drivers, servo Motors, positioning modules and CPU produced by Mitsubishi, Yaskawa and Delta are applied and they have strong performance and excellent stability. Zhangjiagang Liye Machinery Co., Ltd. (hereinafter referred to as the "Company") is specialized in manufacture of machining equipment for metal pipes. The Company covers an area of more than 10,000 m2 with total assets of over CNY 20 million. The main products include 9 series and over 100 models, i.e. pipe machining line, pipe cutter, pipe bender, pipe end forming machine, chamfering machine, gear grinding machine, riveting machine, arc machine and bending press. Our  company is an entity factory.The company has a mature team about production, product research and development,  and product inspection.Our products update faster .We can design or improve new type of machine to meet different customer needs. 1. Electric control system: world-renowned controllers are applied. For example, servo drivers, servo motors, positioning modules and CPU produced by Mitsubishi, Yaskawa and Delta are applied and they have strong performance and excellent stability. Zhangjiagang Liye Machinery Co., Ltd. (hereinafter referred to as the "Company") is specialized in manufacture of machining equipment for metal pipes. The Company covers an area of more than 10,000 m2 with total assets of over CNY 20 million. The main products include 9 series and over 100 models, i.e. pipe machining line, pipe cutter, pipe bender, pipe end forming machine, chamfering machine, gear grinding machine, riveting machine, arc machine and bending press. Our  company is an entity factory.The company has a mature team about production, product research and development,  and product inspection.Our products update faster .We can design or improve new type of machine to meet different customer needs.
Introduction
and Characters:
Helical Speed Reducer uses drive at all
levels to achieve the purpose of decelaration. It is widely used in chemical,
cement and steel, mining and crane, textile and printing and so on. It has
following characters: 1. Highly standard modular designation 2. reach big
ratios and low output speeds. 3. No strict limitation to mounting arrangement
4. high strength, compact dimension 5. long service life 6. low noise 7. The
efficiency of helical speed reducer can reach 95%, the efficiency of worm can
reach 89%. 8. Large radial loading ability 9. Axial load ability of up to 5% of
radial load.
Site
conditions:
Helical speed reducer are suitable for the
operation sites in the ambient temperature from -10℃ to +40℃ and altitude up to 1000m above
the sea level.
Types:
Now we mainly produce R helical reducer, K
helical reducer, F helical reducer, S helical reducer, which also is used in
industry most.
R helical speed reducer: Foot mounted units
of two or three stages
RF helical speed reducer: B5 flange mounted
units of two or three stages helical gears.
RX helical speed reducer: Foot mounted
units of single stage
RXF helical speed reducer: Flange mounted
units of single stage helical gears
GR-R helical speed reducer: Combined types
of two different types.
S helical speed reducer: Foot mounted
helical worm gear units with solid shaft
SA helical speed reducer: Helical-worm gear
units with hollow shafts
SAZ helical speed reducer: B14
flange-mounted helical-worm gear units with hollow shaft
S．R helical speed
reducer: Combined types of series S and series R
K helical reducer: Foot mounted solid
Output Shaft
KF helical reducer: Shaft mounted , hollow
output shaft
KAF helical reducer: B5flange mounted, hollow
output shaft.
Type
selection:
The type of units are normally selected by
customers to meet transmission mounting arrangement requirement. Series R and
series F are applied to the conditions that input shaft and output shaft are
parallel; Series S and K are applied to the conditions that input shaft and
output shaft are vertical.
Helical Gear Reducers,Helical Gear Parallel Shaft Reducer,Helical Worm Geared Speed Reducer,F Helical Gear Reducers JiangYin JiaYou Reducer Co., Ltd. , http://www.general-reducer.com
2.Specification
DW50CNC automatic pipe bending machine
Â
Model
Â
Specification
DW50CNCx2A-1S
DW50CNCx3A-1S
Maximum bending pipe diameter x thickness ( steel )
Φ50mm×3mm
Maximum bending radius(1)
R250mm
Minimum bending radius(2)
According to the pipe diameter
The largest bending angle
190°
Maximum feeding length(3)
3000mm
Feeding method
Direct feeding/Clamping feeding
                                                 Bending speed
Max85°/s
Working speed                      Rotary speed
Max200°/s
                                                 Feeding speed
Max 1000mm/s
                                                 Bending precision
±0.1°
Accuracy                                Rotary precision
±0.1°
                                                Feeding precision
±0.1mm
Information inputting method
1.Axis(X YÂ Z)Â Â Â 2.Working value(Y BÂ C)
Bending method(4)Â Â
1.Servo bending :Â 5KW
(more than 3Â axis)
2.hydraulic bending
Power of ratary servo motor(5)
750W
Power of feeding servo motor(6)
1KW
Max ellbow bending pipe
18
Max storable sections
200
Motor power
5.5kw
Max hydraulic pressure
12MPa
Weight of machine
2500Kg
Measurement size of machineÂ
5000×1350×1230mm
3.Feature
2. Ultra-large CPU that can hold the edition of 400 groups of archives is applied. If it is not sufficient, transmission software can be purchased and installed for the computer. The archives can be stored in hard disk to expand the number of edit groups infinitely. (Optional)
3. WINDOWS operating system is installed in industrial computer to be mated with servo system, so it not only has the servo drive feature, but also has the archives management convenience brought by WINDOWS operating system. The archives can also be stored in hard disk or soft disk to expand the number of edit groups infinitely.
4. It can detect the error and fault automatically and display them on screen, so that the operator can eliminate the failures easily.
5. All processing data is input through the touch screen and each elbow can set compensation value, speed and demould clearance according to different materials.
6. For same tube, each elbow can have 5Â action sequences and 10 sections of speed independently for operation of operators. Besides, the work efficiency can be improved and tube interference point can be reduced.
7. Chinese and English on the touch screen can be switched and the products can also be ordered according to requirements if it is another language on the screen. (Optional)
8. Materials can be delivered directly or wrapped according to requirements and XYZ coordinates can be switched to YBC processing values automatically.
9. After the completion of data editing, the data will be protected by password to prevent unapproved alteration of the data. (Optional)
10. Heat exchanger is provided for the electric control system for automatic heat dissipation. If required, NC air conditioner can be purchased to ensure service life of electric control system. (Optional)
11. The machine is provided with automatic oil injection system to reduce friction of elbow and ensure quality of elbow. (Optional)
12. The machine can be connected to a printer to print all data on the screen. (Optional)
13. Communication interface and data unit can be provided for the machine, for which the network line will be connected to Liye and engineer will conduct remote operation and control, immediate monitoring, software updating and trouble removal, etc. (Optional)
14. The feed position of feed trolley, the interference position of safety device and digital module and interference position of guide mould can be fine adjusted manually and memorized automatically to eliminate the error of manual measurement and losses caused by machine collision.
15. The feed shaft will be detected automatically before action so that it can be prevented from colliding with the machine.
16. Action segments can be selected during actual bending to observe interference points and modification work and improve efficiency.
4.Selection guide
6.Company information
7.Parts brand
8.Contact details
Contact:Miss Ashley
Tel.:0086-512-56395618
Mob.:0086-13812981703
Â
Website:www.zjgly.net/en
2.Specification
DW50CNC automatic pipe bending machine
Â
Model
Â
Specification
DW50CNCx2A-1S
DW50CNCx3A-1S
Maximum bending pipe diameter x thickness ( steel )
Φ50mm×3mm
Maximum bending radius(1)
R250mm
Minimum bending radius(2)
According to the pipe diameter
The largest bending angle
190°
Maximum feeding length(3)
3000mm
Feeding method
Direct feeding/Clamping feeding
                                                 Bending speed
Max85°/s
Working speed                      Rotary speed
Max200°/s
                                                 Feeding speed
Max 1000mm/s
                                                 Bending precision
±0.1°
Accuracy                                Rotary precision
±0.1°
                                                Feeding precision
±0.1mm
Information inputting method
1.Axis(X YÂ Z)Â Â Â 2.Working value(Y BÂ C)
Bending method(4)Â Â
1.Servo bending :Â 5KW
(more than 3Â axis)
2.hydraulic bending
Power of ratary servo motor(5)
750W
Power of feeding servo motor(6)
1KW
Max ellbow bending pipe
18
Max storable sections
200
Motor power
5.5kw
Max hydraulic pressure
12MPa
Weight of machine
2500Kg
Measurement size of machineÂ
5000×1350×1230mm
3.Feature
2. Ultra-large CPU that can hold the edition of 400 groups of archives is applied. If it is not sufficient, transmission software can be purchased and installed for the computer. The archives can be stored in hard disk to expand the number of edit groups infinitely. (Optional)
3. WINDOWS operating system is installed in industrial computer to be mated with servo system, so it not only has the servo drive feature, but also has the archives management convenience brought by WINDOWS operating system. The archives can also be stored in hard disk or soft disk to expand the number of edit groups infinitely.
4. It can detect the error and fault automatically and display them on screen, so that the operator can eliminate the failures easily.
5. All processing data is input through the touch screen and each elbow can set compensation value, speed and demould clearance according to different materials.
6. For same tube, each elbow can have 5Â action sequences and 10 sections of speed independently for operation of operators. Besides, the work efficiency can be improved and tube interference point can be reduced.
7. Chinese and English on the touch screen can be switched and the products can also be ordered according to requirements if it is another language on the screen. (Optional)
8. Materials can be delivered directly or wrapped according to requirements and XYZ coordinates can be switched to YBC processing values automatically.
9. After the completion of data editing, the data will be protected by password to prevent unapproved alteration of the data. (Optional)
10. Heat exchanger is provided for the electric control system for automatic heat dissipation. If required, NC air conditioner can be purchased to ensure service life of electric control system. (Optional)
11. The machine is provided with automatic oil injection system to reduce friction of elbow and ensure quality of elbow. (Optional)
12. The machine can be connected to a printer to print all data on the screen. (Optional)
13. Communication interface and data unit can be provided for the machine, for which the network line will be connected to Liye and engineer will conduct remote operation and control, immediate monitoring, software updating and trouble removal, etc. (Optional)
14. The feed position of feed trolley, the interference position of safety device and digital module and interference position of guide mould can be fine adjusted manually and memorized automatically to eliminate the error of manual measurement and losses caused by machine collision.
15. The feed shaft will be detected automatically before action so that it can be prevented from colliding with the machine.
16. Action segments can be selected during actual bending to observe interference points and modification work and improve efficiency.
4.Selection guide
6.Company information
7.Parts brand
8.Contact details
Contact:Miss Ashley
Tel.:0086-512-56395618
Mob.:0086-13812981703
Â
Website:www.zjgly.net/en
Model NO.: DW50CNCx2A-1S
Condition: New
Extra Services: Support Customized
Weight of Machine: 2500kg
Max Hydraulic Pressure: 12MPa
Bending Method: Hydraulic Bending
Motor Power: 5.5kw
Product Name: Dw50cncx2a-1s Pipe Bending Machinery with Mandrel
Trademark: LiYe
Specification: 5000*1350*1230mm
Origin: Zhangjiagang, China
Model NO.: DW50CNCx2A-1S
Condition: New
Extra Services: Support Customized
Weight of Machine: 2500kg
Max Hydraulic Pressure: 12MPa
Bending Method: Hydraulic Bending
Motor Power: 5.5kw
Product Name: Dw50cncx2a-1s Pipe Bending Machinery with Mandrel
Trademark: LiYe
Specification: 5000*1350*1230mm
Origin: Zhangjiagang, China
1.Product Description